Geoff Sim
Geoff Sim
Good morning, Jeff. Sure, help yourself. Sent from my phoneOn 3 Oct 2022, at 00:36, Jeff Hendrix ***@***.***> wrote: @geoffsim, I have made some changes to inav-configurator and several of...
As P is not used, it could just be, ``` [gcode_macro M141] gcode: SET_TEMPERATURE_FAN_TARGET temperature_fan="chamber" target={params.S|default(0)|int} ```
Hi. I see you have merged my changes. Are these in the master branch yet?Also, did you make any changes to my inav branch too? Regards,Geoff. Sent from Mail for...
Further to my last email, it looks like my PR is redundant ? Sent from Mail for Windows From: GeoffSent: 18 October 2022 07:29To: iNavFlight/inav-configurator; iNavFlight/inav-configuratorCc: MentionSubject: RE: [iNavFlight/inav-configurator] OSD...
Merged with another branch
Never mind 😊I see it is all done and merged – I have deleted my PR and am testing the master branches of inav and config now... Cheers,Geoff. From: GeoffSent:...
Testing of HDZero modes has shown that something has been broken in the mode setting on the firmware. I will have to investigate ☹ Sent from Mail for Windows From:...
This issue can probably be closed now as the issue raised has been addressed.
Yes, count from right to left for a left handed ruler.
HDZERO sends the number of power levels the VTX can support on its initial config MSP message to the FC. It could be used to set the max power levels...