geobitus

Hardware: R_pi4 with CAN/RS485 hut connected trough 485 bus to a JK_B2A8S20P hw V11.XW sw V11.261H using CAN/RS485 port configured for CAN protocol (the RS485 protocol doesn't return anything, maybe...

9600 doesn't return any data. #jkbms -b 115200 -P jkserial --porttype serial >>115200_no_eol.txt (without 120 ohm terminator). [115200_no_eol.txt](https://github.com/jblance/mpp-solar/files/14482112/115200_no_eol.txt) #jkbms -b 115200 -P jkserial --porttype serial >>115200_eol.txt (with 120 ohm terminator)....

No success in getting any data so far. I ordered and wait to receive the JK485 adapters (both types) to see if that make any difference. Soonest I have any...

Back on business. Now just for test the new hardware (jikong RS485 adapter connected to GPS port) using the printbms.py script I get: (mppsolar) geo@solarpi:~ $ python ./printbms.py Cell 1...

I encountered a new issue that I don't succeed to cleanly address. The dalyserialio.py, in my case, seems that don't/can't access the port unless is opened in the background by...

Hi there First of all thanks for sharing that great work. I am using a BLE connection to an JK BMS, I encountered the same issue and found that this...

Happy New One for all. That was the worst feedback ever from my side, not enough tested, my bad :-( sorry for misleading, Digging deeper I found that the sign...