Jeff Geerling
Jeff Geerling
**Shakes fist at Apple**: If I just use Transmit to do an SFTP transfer (file transfer via SSH), I get a _solid_ 115 MB/sec write speed. Going to test a...
Just using `cp` in the Terminal was slower (it started out at 82 MB/sec but dropped down after a couple minutes—nothing on the Pi side seemed to indicate any issues...
And if I use the 2.5 Gbps connection on the Pi 5 (through HatNET! 2.5G), I can get a _very_ consistent 150 MB/sec write speed through to the four SATA...
More thoughts: [macOS Finder is still bad at network file copies](https://www.jeffgeerling.com/blog/2024/macos-finder-still-bad-network-file-copies)
A few people in the video comments (https://www.youtube.com/watch?v=l30sADfDiM8) suggested testing a USB 3 2.5G network adapter instead of the PCIe switch + 2.5G HAT... I would like to try that...
Ah, because I have OMV installed, I had to run `sudo omv-firstaid` and enable the interface. Somehow it grabbed `eth0` from the Pi's internal port, which seems to be why...
On the site: https://pipci.jeffgeerling.com/hats/pimoroni-nvme-base-duo.html
Just ran into this today, it's been about 10 minutes of bumping into issues trying to get the pip package install working, I think I'll just clone the repo instead,...
I am running into this same issue on one of my two Annke C800 cameras. The first camera is fine (just unboxed it and set it up). The second camera,...
Update: rebooting the camera fixed it. I had originally entered the wrong credentials in the Frigate configuration. Because Frigate tries to connect every once in a while, after 7 attempts,...