garyd9

### Is your feature request related to a problem? Please describe The current job queue implementation appears to be a static FIFO list. It would be more useful if items...

Preserve moonraker job queue across reboots

1

### Is your feature request related to a problem? Please describe After a shutdown and reboot of a device running klipper, moonraker, and mainsail, any items previously in the job...

Re: https://ellis3dp.com/Print-Tuning-Guide/articles/determining_max_volumetric_flow_rate.html Your instructions for volumetric flow rate suggest putting a "moderate" flow rate value in the "Print Settings", "Speed" page, and then a higher value in the "Filament Settings",...

Refactor response handling.. and more (parses manually sent 'diagnostics' commands)

12

The parsing of the diagnostic command responses was moved to the command handler (in configureMQTT) The main loop (with the timerInterval) rewritten to only send MQTT commands to request diagnostics...

Please provide STEP files for custom CW2 main body

3

Please provide the .STEP files for the two StealthBurner/CW2 modified files in "EBB SB2240_2209 CAN/Custom Printed Parts/" Specifically, cable_door_EBB_SB.stl and main_body_EBB_SB.stl. I typically use a CW2 mainbody that's modified to...

Stealthburner body, lever cut - cut isn't long enough

1

I'm doing some test fittings with this model, and finding that the "cut" made to the SB body isn't long enough for the LDO Orbiter 2.0. When the SB body...

2023 Chevy Bolt EUV with all the onstar packages (still in my free trial period for "premium"), the plugin successfully remote starts the car using the climate switch. Setting the...

Alternative parts for the wheel and buffer front.

2

The wheel here has an extra hole on the other edge to accommodate loading the filament from right to left without possible tangles occurring (due to the inlet/outlet holes of...