gaijinsr

Hi Martin, thanks for the quick answer. I captured the authentication process on a different computer and extracted the packet with the certificates, ... TLSv1.2 Record Layer: Handshake Protocol: Server...

I now tried using the ready-made firmware (previously I had compiled it myself), this solved the out-of-memory problem. Unfortunately, while everything is fine until I use PEAP, as soon as...

I had the same problem and tried the same route - I would not recommend this, broadcasts over WLAN really mess up your network performance. I modified the Arduino code...

[gtk2-udp.pl.txt](https://github.com/scottlawsonbc/audio-reactive-led-strip/files/4845030/gtk2-udp.pl.txt)

@VladlenKaveev Adding devices is easy, see attachment. Sending data to a couple of devices is no problem, but multicasting the data to every device on the network (which we are...

@VladlenKaveev I have been running 6 devices: no problem at all. Also, you could lower the FPS to 30. @not-matt I tried LedFx, but - as you wrote - installation...

This sounds very much like a problem with your power source. I have seen Raspberry Pis "eat" SD cards when the power source was too weak.

Hi, try [https://github.com/zhujisheng/audio-reactive-led-strip](https://github.com/zhujisheng/audio-reactive-led-strip), works great for me. I have a couple of ESP8266 as UDP receivers to received synchronized data from Scott's software on a Laptop for larger installations and...