MMDVMCal

MMDVMCal copied to clipboard

NAK error after choosing BER Test-mode

1

I am not sure where the problem is located (MMDVM-Firmware or MMDVMCal), but there seems to be something broken. I'm using FW 1.60 on a MMDVM_Dual_Hat with MMDVMCal 20211101. Neither...

DL5SMB

How to run mmdvmcal ?

1

Hi, I'm using mmdvm repeater with nucleo-446re, two motorola radios, RPi4/2GB and everything works great . I have update the controller with new MMDVM FW, the MMDVMHost works but the...

labdvm

Hello, would is be possible to not only show the BER, but also the RSSI in the output of the BER Test Mode (FEC) for DMR Simplex? Thanks in advance...

criede

mmdvmvcal info for K/k Set FM Deviation Mode

5

I do not know if it is an error or something in the MMDVMCAL commands is not clear to me, I see that the K / k command is indicated...

IK8JHL

Hey Jonathan, It’s possible to a test pattern with Talker Alias, With the different modes 7-bit, 8-bit, 16-bit. We have some issues if Brandmeister generate the TA that hytera show...

do1kbl

I would like to see an M17 calibration mode added. This would be used to adjust frequency offset and RX audio level for optimal reception. Thanks in advance...73

mrickey