mmdvmvcal info for K/k Set FM Deviation Mode

[IK8JHL]

I do not know if it is an error or something in the MMDVMCAL commands is not clear to me, I see that the K / k command is indicated two times both for the Ber Test Mode D-star (which works) and for the FM deviation, someone can explain to me why ?

[g4klx]

It looks like you are running an old version. Setting FM deviation is done by using 'F' in more modern versions.

On Sunday, 27 December 2020, 20:09:07 GMT, IK8JHL <[email protected]> wrote:  

I do not know if it is an error or something in the MMDVMCAL commands is not clear to me, I see that the K / k command is indicated two times both for the Ber Test Mode D-star (which works) and for the FM deviation, someone can explain to me why ?

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub, or unsubscribe.

[IK8JHL]

Thanks for the information, I am using pistar-mmdvcal command directly from pi-star 4.1.3, (Dash20201205), I thought MMDVCAL would update itself, how can I do to update it? But there is still something that is not clear to me, you have told that "F" will be used for "FM Deviation", but in Readme.md the F is described as "Increase Frequency " and also there is no trace of the FM deviation .. .

[IK8JHL]

The issue its present also with latest Version

[g4klx]

Finally found the problem. You cannot run FM on a hotspot, so the entry for FM should not be there at all. I have removed it from the hotspot help text.

[IK8JHL]

It was exactly what I wanted to suggest ;-)