Manu

Here is the event log when having the issue:  Also, this might be related or interesting: 

Correct, I have this setting enabled. Disabling the setting does no longer put the system in standby. It does now write a "Channel is tripped!" message.

I do have some longer cables, about 40 cm. Maybe in order to clarify the issue, it would be practical to have a message on screen when going into standby...

Exactly, I somehow expected "minutes" not "minimal value". Anyway, this resolves the issue. But still, I have at least 3 other people who thought it was "minutes". It seems to...

It still feels a bit confusing. I have seen _mim_ and _Mnm_ used sometimes instead of _Min_ or _min_.

I think using a Secure Element, the secure bootloader is quite unecessary. This makes sense when the end device is running in an untrusted environnement. A BB3 will most likely...

Indeed, @fietser28 does propose a very reasonable approach. We should define a simple thread model, let me make a first step and feel free to comment. Here are the 4...

Yes, DP is enabled on this channel.

Hello, sorry for the delayed response. So here is the test with the LIST mode (3v, 5v, with 10 ms Dwell Time).  And physically, the output is:  With...

It would be nice to have a "phantom" wave which is an overlay on named traces. It could be used to compare captured traces to configured timings (from datasheet /...