openocean
openocean copied to clipboard
fruggy83
Hallo Daniel, ich teste jetzt schon ein paar Tage verschiedenes mit meinem Enocean Setup und verfolge dein Binding hier. Habe jetzt auch die neueste Version von dir installiert, aber mir...
Dear @fruggy83 we are using your project to try to control a roller shutter (we don't have a lot information about it) and a lamp (also no info for the...
Hallo, ich habe gestern diesen Post im openHAB Forum eingegeben, aber er scheint mir hier besser aufgehoben zu sein. Was mache ich falsch? Danke für die Hilfe lg Sepp Hi,...
Hi, this actor uses a special version of EEP A5-08-01 as document here [https://www.eltako.com/fileadmin/downloads/de/_bedienung/FBH65SB_30065856-1_dtsch.pdf](url) Currently the binding delivers a temperature-channel and an occupancy-channel, which both are not supported by this...
This EEP has a different content for incoming and outgoing telegrams. The response feature from #63 is needed.
This EEP consists of three types: - Type A: device requests data - Type B: controller sends data - Type C: device sends data So the device can send type...
I would like to have the EEP D2-01-0C running. It is used to control electrical heaters in France and measure their energy consumption. Both Nodon and Avidsen have implemented this...
Hi Daniel, Thanks for this binding! I have attached an [Omnio RTF-161](https://www.omnio.ch/en/produkte/raumfuehler-rtf-ch-161.html) (EEP A5-10-10). The room controller should be giving temp, humidity, occupancy and set point (in °C) Below is...
Currently almost all RPS devices are treated as Simple Push Buttons during auto discovery. This could be improved with a dedicated detection method for RPS EEP. * Analyse T21 and...
Hi @fruggy83 This is running in my installation now for some days. I think it should work. Looking at [1] I think this should work with all devices listed therein....
