Martin Mathes

Being a total flatpak noob, I tried to create a flatpak manifest. I currently struggle with getting the opencv dependency to work. It needs `OPENCV_LINK_PATHS` environment variable needs to be...

@pkendall64 I just flashed my TX16S MKII and a betafpv lite RX to this PR version, and it doesn't improve the behavior as far as I can tell. That is,...

@0crap been there, done that, no change. but thanks for taking a look at this :) In the meantime I think I found a clue @pkendall64 : I flashed both...

I seem to have fixed it!? by playing with the dynamic power settings (turning it off/on, changing power levels). I think it started to disappear once I disabled dynamic power,...

@0crap first an update _without_ `reset?model`: This morning, the issue I thought fixed yesterday just reappeared. Then I tried the suggested `reset?model`, and so far the problem didn't manifest in...

And here we go again...the `reset?model` "fix" only worked for two hours or so, then the problem appeared again. Next I tried the same (`reset?model`) with the RX, which again...

> Try the PR above as asked by pkendall64. > Take your time to see if that makes an improvement. Already tried that (https://github.com/ExpressLRS/ExpressLRS/issues/1834#issuecomment-1250232098) and it showed no difference in...

Just a confirmation: ISM firmware version is stable for multiple hours of simulator flying. Can you confirm my findings @robertgodlewski ?

Same here, finally came around to testing with the linked PR, and while it *may* have improved (hard to tell), I still get the telemetry loops after a few minutes.

Maybe @pkendall64 is onto something with https://github.com/ExpressLRS/ExpressLRS/pull/1867 ? After flashing commit `03d9d5` and a good hour of testing the 250Hz LoRa mode seems to be stable for me. 500Hz only...