Wesley Fraser

You mean, to compile the firmware. Yeah I agree. But based on the other bug reports, compiling the current rev of the firmware is borked. So I haven't bothered getting...

But the issue -- a bug in the firmware -- is not solved. All I have provided is a workaround solution that is not a permanent solution, as it requires...

Some additional details - tried my first print through octoprint, and the motor directions are reversed, even after my hardwire pin reversal. So it seems the reversed motor directions are...

The updates to the compiled firmware seem to have made the motor reversal consistent at least. Updated to the recent using firmware_ender5.bin. Autohoming from LCD produces reversed motor movement, as...

There is no tutorial that I know of. But as I stated in my previous message, if you simply reverse the pins in the stepper motor wires at either the...

Do you mean go to the wrong corner during homing, during start or end of prints, or something else?

Yep I agree. Don't consider it a deal breaker as it was an easy fix. Hey would you mind sharing your config files? I haven't had a need to compile...

I'd appreciate it. Mind posting here?

FYI I was having these problems as well. Turns out the issues were entirely with how github allows one to download the precompiled firmwares. Some of the ways one can...

This could be implemented with small changes to MCMCfit and the realization that lnprob can fit xym, only xy, or only m. With appropriately exposed options in the MCMCfit call,...