Frank Wunderlich

Bpi responds here: https://forum.banana-pi.org/t/bpi-r3-hw-issues/14027/2 I wonder why it affects v1.1 with cp21x2 and not v1.0. I have no profilic adapter as they are reported as buggy on other boards (e.g....

simon says there are no differences regarding this between v1.0 and v1.1 and only PL2303 is affected, shematics look same too added mt7915e module to /etc/modules-load.d/wifi.conf and see no issues...

Have not done anything with acls yet. I would look for ext4 in config...maybe another option is needed for it

acl does not depend on hardware....if you have another sbc/pc running with acl just compare kernel-config to get the possible option missing in my config zcat /proc/config.gz

which SFP do you use? which issue do you have with this? does sfp appear in dmesg? what does ethtool say? there are several patches for sfp-support (mostly quirks for...

which SFP do you use exactly? c6869008cc05 2023-03-14 net: sfp: support 2.5g copper SFP v3 should be make 2g5 sfp from aliexpress work...if you have the tplink then daniel prepared...

Ok,the tp-link needs patch from daniel i have not yet in my tree...

have added the tp-link quirk, but daniel reports that it is not clean working and they search the issue https://www.spinics.net/lists/netdev/msg892902.html btw. there is 6.2-main...better than rc to use but i...

which fibre sfp? mine (H!Fibre in left cage) is working in 6.3-rc sorry about 6.2-main, had not pushed it...done now

6.2-main...6.3 is not final (sry typo from me...rc branches are till the kernel is released - when only rc are available) which slot do you use? what does ethtool and...