Frank Wunderlich

So you use the oem 2g5 sfp i also have? Your patch basicly reverts erics patch right? https://github.com/frank-w/BPI-Router-Linux/commit/dd3dd754cdc7cb1e61f6588eaa6b8ee15896b42b Have you added realtek phy driver from him?

You should post this to bpi-forum where eric can take a look at it. I'm no phy specialist :p but 0x56 looks like rollball protocol and good you can access...

Have you deleted the post with the mii patch?

i'm not on irc i had added erics patches where the last disables inband for 2.5G, maybe you only need a quirk setting the 2.5g for your SFP like we...

Have you tried the quirk approach to set the speed to 2500baseT for the sfp?

similar to this, but with your vendor/product https://github.com/frank-w/BPI-Router-Linux/commit/e27aca3760c08b7b05aea71068bd609aa93e7b35 can you pls post part of your dmesg where sfp is recognized for vendor-string and/or output of ethtool -m ethX

R3mini is currently only supported in specific r3mini branches as phy driver is still in development. I added the necessary patches in my current working branch 6.8-dango. Also uboot is...

My uboot-repo also have a r3mini branch where i have modified openwrt driver (with wifi-firmware builtin) but same issue that tftp only works once. https://github.com/frank-w/u-boot/commits/2024-04-bpi/ Flashing firmware to boot1 has...

I managed to flash firmware to boot1 https://forum.banana-pi.org/t/r3mini-uboot-getting-ethernet-nvme-to-work/17165/21?u=frank-w Can this issue now be closed?

can confirm the difference ``` root@bpi-r3:~# cat /sys/class/ieee80211/phy*/hwmon*/temp1_input 66000 45000 ``` measured the chips with infrared thermometer 2g4: 47°C 5G: 44°C