fmalfatto

Made some test with SONY SA-NS410. It's LAN connected with fixed IP 192.168.1.142. The lms server IP is 192.168.1.25 From log: AddRaopDevice:881 [0x1116b8]: adding renderer (SONY) 1) While using it,...

It would be great for me also! I still have the 3486 burglar-alarm unit and that's the only way I can manage it because it's not well covered by phone...

It should be under the who=5 section, but I did find the document they are referring here: https://www.myopen-legrandgroup.com/forums/topic/frame-who9-in-alarm/

Any new? I confirm I have the 3486 central and I would help if possible. The who 5 support is mandatory for me to shift from Domoticz to Openhab.

Yes, Mark, I agree, but my goal is to control just activation/deactivation as result of other conditions, such activate it at a certain hour only IF all sensors are allowing,...

I was able to have my 3486 engaged/disengaged, thanks to some info I found here: [https://community.openhab.org/t/solved-openwebnet-alarm-in-openhab/83906](url) I have both MHS1 (not sending anything to 3486) and LN4890 unofficial gateway. This...

I still have this problem on raspbian stretch with 26.3.73.gitaa3aa38-2. The outputs listed from the web interface are changing during day, but they are complete only after a restart. When...

[2018-11-02 13:44:49] [ INFO] raop: Adding AirPlay device 'Bose': password: 0, verification: 0, encrypt: 0, authsetup: 1, metadata: 0, type Other, address 192.168.1.141:1024 [2018-11-02 13:44:50] [ INFO] raop: Adding AirPlay...

But it seems that raop notifies when a device reappears, but forked-daapd does not catch it: [2018-11-02 21:34:09] [ LOG] mdns: Avahi Resolver failure: service '000C8A575193@Bose' type '_raop._tcp' proto 0:...

At the moment of the log, forked-daapd shows only two outputs. After restarting avahi it shows them all. # mpc outputs Output 23091 (Ospiti) is enabled # avahi-browse -kt _raop._tcp...