florianL21

I am just about to order all the parts but the esp32 is a major concern for me especially because of the missing support for native USB. I would be...

Currently it is only possible to set the colors of the LEDs statically for certain sections. This is done in the Configuration.h file. For example here: https://github.com/florianL21/LED-ClockShelf/blob/master/lib/LED_clock/Config/Setup/diy-machines/Configuration.h#L101 Changing the colors...

Yeah that is quite possible sadly. I do want to pick this project back up and I am convinced that it should be quite easy to add support for setting...

As far as I can tell the WLED app is quite dependent on controlling an actual WLED device. I am afraid this would require to really spend some effort on...

Interesting issue. I have not had any reports like that yet so it should not be a common issue. Also the NPT implementation should not really have changed at all...

@Iraithium I've seen you have been busy and I am happy to hear that you made some improvements. I'm more than happy to have you contribute them to the repo...

Hello, Did you disable the blynk functionality? If you would like to use static colors I would recommend disabling it so it does not interfere with your static colors

Hi, I built 2 of these already and on one of them I made an electronics box that contains the ESP and the PSU and only have the 3 wires...

Ah sorry, I misunderstood. Yes the red arrow coming in from the left side towards the segment 0 is where the signal enters the LED strips. Note that the segments...

I am not 100% sure anymore if it would just work out of the box with your wiring. But in any case you should be able to use the code...