Flipper Zelebro

Hello @UrSuLa360 , you are wellcome. Yes I tested it on my own garage. I was reviewing the SUBs you shared and I realised yours are sligtly diferent form mine....

In fact the PR @Skorpionm did [#3244 ](https://github.com/flipperdevices/flipperzero-firmware/pull/3244) is almost the one I was testing. I have tested with static const SubGhzBlockConst subghz_protocol_mastercode_const = { //.te_short = 1072, //.te_long =...

I have been studying the signals from the SUB files and what I can see is that the durations of the new remote are longer than the original clemsa, aprox....

Have you tried recording the raw data with RSSI Threshold? I usually set RSSI Threshold to -70 dBm and signal is much clearer