flatcapper

My tft 35 prints fine from day 1. I've even updated the firmware to the tft with no issues. Now the tft on the bx is a different story. The...

Hey, I'm not trying to change the subject, but what about connecting the relay to the tft35 e3 v3.0 monitor? It has an option to turn off printer after done...

combolek, yep there sure is, however no one has answered the issue for the other user either. While waiting for you all to get around to possible suggestions, I went...

Hello David, I am in the same boat as you are in. I have a ender 3 pro that I installed the btt skr mini e3 v2.0 mainboard and tft35...

That's the other thing I found. The psu settings in the latest Marlin software were not at line 823, but were at line 1118. I guess that doesn't matter as...

Hello robus1, did you also have to make changes in the firmware also. I assume that you plugged into the skr mainboard? I’m trying to plug into the tft35 as...

Hello everyone, I hooked my relay up through the tft35 and it's working great now. BTT sent me the info I needed to get it to work. I plugged the...

Davideq74, yep the instructions I got were from btt specifically for the tft35. I didn't want to mess with the firmware for the mainboard, and besides, the tft35 is supposed...

Hello everyone, I am removing the btt relay v1.2 permanently as a failed piece of hardware. It's just sad when equipment all from the same manufacturer does not work together....

Hello Davideq74, I suppose I could re- assemble the relay v1.2 for the 4 time. I’ve not had any luck getting it to work, even when btt tech tells me...