firewiremb

I had the same Problem today. It happend during normal Operation. ``` pi@raspberrypi:~ $ sudo systemctl status shutters.service ● shutters.service - Pi Somfy Shutter Service Loaded: loaded (/etc/systemd/system/shutters.service; enabled; vendor...

Everything worked fine again after correcting the values as Nickuino mentioned. But now it already happend again. Is there something I can do to support debugging? ``` [Shutters] 0x279621 =...

@ssanden Thank you for your hint. This works for me too. @Secarius The reason for the error is the initial declaration of [ShutterIntermediatePositions] values as _None_ in the Config File....

@Secarius I don't know if all Somfy systems have this feature. In the installation in my house, motors are used that can save an intermediate position, so to speak, "in...

This problem almost left me desperate while setting up the installation in my house. I think it would be good if you created a pull request to fix the problem...

Hi, I think I found one of the problems. An example: Shutter A is fully opened in the morning an closed for 60% by scheduled operations lets say at 8:00....

@rbswift and @stalakerob I do not use a controller outside Pi-Somfy. "Mannually" in my post from yesterday means I am using the Pi-Somfy web interface and not a scheduled operation....

If you follow the commissioning instructions step by step (alternative 5 systemd service), the file operateShutters.conf is created in the directory /home/pi. Apparently this is not used. The file with...

Hello Jakob, Since yesterday at 4:00 p.m. the problem has reappeared. For https://api.brightsky.dev/current_weather?lat=48.72&lon=11.08, "null" is returned for precipitation_xx, wind_gust_speed_xx, and sunshine_xx, respectively. Before the problem occurred, the fallback values for...

I can confirm that. Thank you for the quick support