Cura-LinearAdvanceSettingPlugin

Cura-LinearAdvanceSettingPlugin copied to clipboard

Hi. I do not know if this should be better implemented in marlin but it would increase print speed if travel moves are not done with linear advance. This would...

NilsRo

The plugin does not work properly with Cura 5.0.0

3

Hello, I installed Ultimaker Cura 5.0.0 and the Linear Advance Settings plugin version 3.6.0. I entered the following into the material file: 1.43 I entered the following into the intent...

x40-Community

Update Readme to reflect new Klipper syntax

3

Klipper received a breaking change on setting default parameters lately, so the macro needs to be updated. https://github.com/Klipper3d/klipper/issues/4864

soxhi8

Documentation for Klipper users is incorrect

3

The documentation has an invalid GCODE M900 conversion macro that doesn't work on current versions of klipper (maybe past versions too?). Instead, you should update the readme to this valid...

psiberfunk

Initial layer factor not showing up, if all the other factors are the same.

2

Thank you very much for this great plugin.  I use this plugin mostly to disable LA for the first layer. But it seems if I only set the Initial...

aLECChe

Add documentation of incompatible cura options.

4

Hi @fieldOfView Marlin's documentation is a bit vague about it. > Some slicers have options to control the nozzle pressure. Common names are: Pressure advance, Coast at end, extra restart...

matiasdelellis

There are several speed/acceleration settings in Cura for which there are no K settings: - `material_linear_advance_factor_ironing` - `material_linear_advance_factor_roofing` (top surface skin) - ~~`material_linear_advance_factor_support`~~ - `material_linear_advance_factor_support_infill` - ~~`material_linear_advance_factor_support_interface`~~ - `material_linear_advance_factor_support_roof` -...

JohnTasto

Single layer file behaves oddly in 3.6 and 4.0 (at least)

1

When reviewing the latest version of the plugin, I first tried with the attached file, which only prints a single layer. [really_late_m900.3mf.txt](https://github.com/fieldOfView/Cura-LinearAdvanceSettingPlugin/files/5232752/really_late_m900.3mf.txt) It seems it attaches the 'M900' line near...

rburema

Feature request: Allow setting K values per mesh

2

The results from the Marlin calibration pattern don't seem to translate to real world prints, so I'd like to be able to calibrate K by printing an array of test...

JohnTasto

Option to enable at layer N or disable for initial layer

6

My first layers do not print well with LA on, and it might not really be that much needed at first layer speed. It would be nice if this plugin...

KimmoHop