Franco Fichtner
Franco Fichtner
During the problematic WAN switch? The modem should reconnect and cause rc.newwanip logs to appear in the system log.
Well according to here it ran into the execution: 1 2024-11-07T15:05:30+00:00 opnsense.telinformix.com opnsense 28656 - [meta sequenceId="4303"] /usr/local/etc/rc.newwanip: IP address change detected, killing states of old ip 10.165.119.141 Check the...
Ok, good. Make sure the change is still applied to the file and see what happens on the next reconnect. It looks like this will start working eventually :)
routes, monitors and filters are reloaded before the cache IP purge and this looks like the correct order. Can you add a sleep before the 3 pfctl invokes? just a...
Need a system (general) log from a fresh boot to see what's going on. There should be an error relating to this in there and maybe timing related hints WRT...
I see too many > Device gif0 missing required local address, skipping now. so I'm not sure why that would be so persistent. What's configured in gif0? Cheers, Franco
There seems to be a bit of drift between your label "Lan" and the internal identifier perhaps. Sometimes it happens that the internal "wan" is redefined as a LAN type...
> Although I am still confused in general why the Gif interface binding to my Lan causes it to work, rather than it binding to the WAN. If the DHCPv6...
Hmm the way the code is set up is this should pull a LAN address from a prefix-only WAN as well. I'm starting to suspect the issue is just with...
(After debug is set it needs a reboot to apply and produce debug output. Forgot to say that.)