French fries

I'd like to give a try porting to OpenBSD, adding support for MBR/PBR, please tell me if this makes sense.

I installed the latest driver from git and the problem remains. The thunderbolt network card is not detected, as shows ifconfig -a: ``` ifconfig -a enp0s31f6: flags=4099 mtu 1500 enx083a8854e6af:...

sudo insmod -f /lib/modules/5.16.0-6-amd64/aquantia/atlantic.ko insmod: ERROR: could not insert module /lib/modules/5.16.0-6-amd64/aquantia/atlantic.ko: Operation not permitted ~/Documents/logiciels/Aquantia/AQtion$ lsmod | grep atlantic

Ok, I understand what is going on: as the system is protected with UEFI I cannot insert a module unless it is signed. So I went back to the stock...

Thanks. Here us the output of lspci, no trace of AQC here. ``` lspci 00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers (rev 08)...

After unpluging/repluging, the Aquantia PCI device is visible: `0a:00.0 Ethernet controller: Aquantia Corp. Device 80b1 (rev 02)` ``` lspci -tv -[0000:00]-+-00.0 Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host...

I modified my Thunderbolt setting. Now devices are not attached in pre-boot and only enabled with secure connection. The network card is seen by bolt utility but it is not...

Hello. Firstly: You should be warned that 10Gb/s copper does get very hot and after a certain temperature speed goes down to 1Gb/s. This is why using 10Gb SFP+ is...

+1 A better tagging is also needed for https://github.com/quodlibet/quodlibet/issues/2243. MusicBrainz Picard needs a review, as it is a good tagger https://picard.musicbrainz.org/ (tried to upload screenshots without success). In QL, personally,...

Sure, MusicBrainz is only an option for tagging. But what do you mean by " I'd prefer if not using musicbrainz is a supported option in call cases,". Do you...