fastsystem

Hello. Following the comments below, I installed Ubuntu and the screen was successful. https://github.com/Seeed-Studio/seeed-linux-dtoverlays/issues/28#issuecomment-911520201 https://github.com/Seeed-Studio/seeed-linux-dtoverlays/issues/28#issuecomment-939662366 However, the F1, F2, F3 and OK buttons are not working. According to the following...

Hello @lakshanthad, I changed it, but it didn't change. ``` dtoverlay=reTerminal,tp_rotate=1 　　　　↓ dtoverlay=reTerminal,addr=0x20,mcp23008,tp_rotate=1 ``` show dmeg

Hello @bigbearishappy, "ll /dev/i2c*" was empty. So I installed "raspi-config" on ubuntu and enabled I2C. As you can see from the picture, since 0 x 38 is valid, we use...