evils

so far i've tried to switch the handedness of the halves to show the right half's wiring is ok found that side detection isn't supported in data driven keyboards yet...

turns out i'm an idiot who was flashing a different file than the one that was just built everything seems to work, except now communication between the halves no longer...

FWIW, i'm getting these every ~2s ``` 356493 2020-04-05 18:33:10 +0200 error: dev=0:0, sector=-1, nr_sector=0, error='I/O error', rwbs='N', cmd='', ``` ``` 356494 2020-04-05 18:33:12 +0200 error: dev=0:0, sector=-1, nr_sector=0, error='I/O...

@intika 4.0.3 has this with and without `-H`

just a note since i found this after searching for the error i'm getting on opening the python terminal in the pcb editor this is a long-standing issue with kicad...

any hope of getting some help with this? i'm only doing a hobby thing, but this is a bit of a blocker for progress

@Dirbaio cargo-embed works, so i suspect this is a probe-run issue rather than probe-rs

interesting, do you know what the cause is?

cargo-embed v0.8.0 works as well though i suppose it's entirely possible the bug got introduced after that

upgrading my stlink v3 from V3J3M2 to V3J6M2 to V3J7M3 (their utility is annoying..., i didn't try on the intermediate version) didn't help upgrading my stlink v2 from V2J17S0 to...