evildad

@yeyeto2788 Which USB to UART Converter did you use?

Well I should have read this first but I've flashed the Firmware to my Azarton-MHO-C401 and have the freeze, too. The readings work fine but having the Display back would...

Ok sounds like a plan for the weekend :-) Just to be sure... the working one will boot the orginal firmware again after step 5?

@pvvx ok it seems like it worked and best of all it's still working :-) Attached is the FullFlash.bin **Don't flash this as that's the one needed to make the...

@pvvx perfect... successfully unfreezed it 👍

Just wanted to say that the RS485 CAN Hat works fine with my old Pi2 which I'm using. Added the config to /boot/config.txt and the rest was straight forward. `#...

Hi @acalatrava , sorry for my late answer, CAN-H and CAN-L with twisted pair cable is working for me, GND is not needed.

Thanks after a "little" bit of time I've fixed it to a scene entity.

Using the light 0 option would turn off a manually turned on light after the delay. The `disable_switch_entities` option should be the way to go.

@chbndrhnns : Is this still an open issue or should we close it?