David K Clark

yeah, i have an ender 3 v2 neo and I am using mriscoc firmware, and the raspberry pi is a pi4 8G. Apparently the marlin base code does a good...

yet another "interesting thing" - as the resolution setting is used in the arc algorithm to determine if the arc is close enough to the "jagged straight lines" of the...

I would agree that you will want totally different things if you are using klipper to marlin... I have been using onshape, and in fine mode the stl mesh produced...

@ninja- is there anything that is causing extra gcode between G1 command on the outer wall? I am thinking like “slow down for overhangs” or “precise walls”. If there is...

Just to double back here with some more info: I ran into an example where the arc fitting just would not work. My usual workflow is to export from onshape...

I am assuming you are asking about the arc welder step? Without octoprint there are two options: use the CLI version of arcwelder (good instructions in that repo: https://github.com/FormerLurker/ArcWelderLib) on...

do you mean "arc fitting" checkbox? As far as I know there is no "enable arc-welder" in orca, just the custom/similar implementation. And I just had a play around and...

I just commended on a slightly newer similar question: https://github.com/teachingtechYT/teachingtechYT.github.io/issues/477 Is everyone commenting on this issue an ender user? I have an ender 3 v2 neo running mriscoc firmware and...

I've been having an issue with a similar thing. I was increasing the speed setting in this test and just not seeing any changes in the speed. I notice in...

It would be nice to see something like this feature make it possible to use "upload and print" with post processing plugins active on octoprint. E.g. I have ArcWelder plugin...