evanshultz

@eeyrjmr The script looks fine now, but please re-generate the footprint.

Why is the courtyard not on a 0.01mm grid? Can you provide that reference? I don't see anything in the drawings linked above. The QTH link above is for the...

Mark the PCB edge explicit, then. This does not affect the courtyard which should conform to normal KLC requirements. See https://github.com/KiCad/kicad-footprints/pull/570 and several footprints in the library (search for "edge"...

Please let me know when you've made the changes and are ready for a review then. Thanks!

@calebreister So this will only be the connector footprints. Just to clarify in case I missed something. Mounting hole: 1. According to http://kicad-pcb.org/libraries/klc/G1.9/, metric units are preferred. Would it be...

Thanks for responding! When you can, let us know what you find and if I've gotten anything wrong. Scripts for footprints are at https://github.com/pointhi/kicad-footprint-generator, and for yours specifically at https://github.com/pointhi/kicad-footprint-generator/tree/master/scripts/Connector/Connector_Samtec....

I'm fine to just add them here. We won't have to review each individual one since they are generated by a script, so it doesn't actually increase the review burden...

Welcome and thanks for contributing to the KiCad official library! First, you will need to sign the CLA before we can review and accept your submission.

1. The ref board has square corners. Perhaps use polygons or a custom shape to match this? Note that this is outside my expertise so maybe it doesn't matter? 1....

Thanks! I checked the dimensions against the eval board Gerbers and it appears quite close. Perhaps off a little bit in some areas and maybe each "U" section is slightly...