eu-david
eu-david
it worked, the IR emitter started blinking, how do I save and generate the driver with this specific config?
This way it works only once. After reboot it will start the IR emitter and will work only one time, if I try to initiate it again, it starts the...
Also found that it will works for 1 more time after running the `linux-enable-ir-emitter run`. So it is either reboot or running the `run` command.
`sudo linux-enable-ir-emitter tweak` ``` Tweaking the camera /dev/video2 Caution, you could break the camera. 0) unit: 4, selector: 2, control: 0 32 1) unit: 4, selector: 3, control: 0 2)...
It starts the IR emitter only for 1 session, after which it starts just the camera without the IR emitter. So if I run `linux-enable-ir-emitter -d /dev/video2 test` for the...
When setting to `1 3 3 0 0 0 0 0 0` it does not start the IR emitter at all.
Thanks, I will play with it and report back if I manage to find the right config.
Tried the `tweak` command for all the `true / false` instructions that I found but without any result. As a workaround is to have a cron job that runs the...