Yehor Vialov

Looks like I have the same or similar issue. I've added a service to reset the energy total and wrote down my electricity meter data to compare it with the...

Hi @sillymoi . That's called noise. Those photodiode boards are very noisy when switching their state. This electromagnetic noise is counted as pulses and you are getting the wrong measurements....

> Are there any errors in browser's console? No errors in the console

I'd love to have such feature as well, but here is an alternative using Mushroom cards and [card-mod](https://github.com/thomasloven/lovelace-card-mod):  Yaml config of title: ```yaml type:...

What about [libinput-gestures](https://github.com/bulletmark/libinput-gestures)? It works fine according to [this](https://www.reddit.com/r/GalliumOS/comments/5lgrxe/psa_multitouch_gestures_on_galliumos/).

Dell Inspiron Chromebook 14 2-in-1 (7486) Gallium OS installed instead of Chrome OS with full firmware [UEFI] - [x] Firmware available - [x] Boots from USB ISO - [x] Boots...

> > * Touchscreen **reacts only on stylus, but not fingers. The same issue is with Ubuntu 12.04** > > That's because the stylus is a different device, specifically it's...

I'm moved away from ha-zha-new to a default zha component as now it satisfies all my needs and support all my devices.

Ok, so I have Adaptive Lighting 1.1.0 It sets to control a light group and I change the brightness of this group with a remote directly bound to a group....

Lets assume you have some source where you can get the value when change came not from user. Let it be: ``` MyDataStorage ``` With above in mind: ``` bool...