Erik Slagter
Erik Slagter
Hi Michael, Thanks for your quick response. I'll try to supply extra information and have some additional questions too. I already assumed there were some hardware-imposed limitations (regarding the print...
I was thinking the same, but when I press the feed button, the paper advances exactly one label, positioned exactly at the tearing point, so I don't think of the...
Can you explain what the different "fit" options actually mean (for png files)? - none - auto - autofit - fit - fill
Apparently I can't use pdf as input anyway? ``` eos erik:~ $ lprint submit test.pdf label-30 E [2022-04-22T17:16:30.145Z] [Job 30] Unable to process job with format 'application/pdf'. ```
Thanks! So I think that means that I should be using ideally "none", but that doesn't work, so I should be using "fill" and trial-and-error what the actual visible resolution...
I am going to try, thanks!
BTW can you explain the following? In "fit" mode: When I use a 1" x 2 1/8" label (Dymo 11352) I would expect the printable area to be 300 (DPI)...
Great :+1: In the meantime still experimenting.
I now resorted to sending a real high resolution PNG so scaling doesn't matter much and keeping a marging in the image of about 10% on both sides and that...
Also can you give an example to get the tape printer (of the Dymo DUO printer) working. I now only get blank tape feeded. I can't find how to configure...