Eric Mueller

Depends what you mean by the original problem. If you want to modify the heat of reaction for evaporation of moisture, this can be done by explicitly defining the reaction,...

Yup it is a typo in the Guide. A_char and H_m have the same units. I will correct it - thanks!

So I explored increasing the resolution a bit more. For the boundary model I set a fixed cell size (0.00125m) to get 40 layers. For the particle model I have...

Well... I found my 10% error for the particles at high resolution. The default emissivity is 0.9 which I wasn't taking into account in my analytical solution. Doh. I'm testing...

Sounds good - I made similar modifications/simplifications to my test case. I have tried a few different ideas, some of which I think are similar to what you are describing...

Also, something that came up in this case when I was looking at devices to measure directional intensity is this bit of code was picking up the wrong radiation angle...

Its just the unit vector in the direction of the radiation angle and `DLX` etc are integrated over the solid angle. How this is causing the difference when comparing to...

Okay I'll take a look

Changing the packing ratio (VEG_LSET_BETA) to a lower value will allow it to run... but the current defaults aren't unphysical and it should run. This highlighted an issue with handing...

In addition, its worth noting these characteristics are effectively fixed for level set. The burnout time is a function of the fuel properties (surface-to-volume ratio in our case), and then...