Enver

@IvAn-source-git it's single-loop Where this file is located? I can't find it in ESPHome-OpenTherm folder. Please advise.

ok, from your repo I understood I simply can download it to my RPI and change it there. but what exactly do I have to change there?

@IvAn-source-git it didn't help In addition, I found out that some other data is also absent 

As you can see there is definitely incorrect data for: - external temp - water pressure - return temp I'm not sure if it affects anyhow the PID operation but...

> > > > hi, yes there are many boilers that have many more sensors than your bosch model btw, is there any list of boilers with the most data...

Make your external components section look like this ``` external_components: source: github://arthurrump/esphome-opentherm@main ```

@krzysiek200 your esphome config would help

Just use it in this way ``` switch: - platform: opentherm ch_enable: name: "Gas Heating" mode: restore_default_on icon: mdi:water-boiler dhw_enable: name: "Gas Hot Water" mode: restore_default_off icon: mdi:hand-water - platform:...

@Aliskin-Papa here is the solution you can use https://github.com/arthurrump/esphome-opentherm/issues/22#issuecomment-1778745816