emandt

Changing GCC version (from 11.2 to 12.1) doesn't change anything......I don't understand how all of you can build it. I just pulled from git source and executed the build command...

One year is passed without any news about this?

Forcing pairing via a specific Router (not the Coordinator Conbee 3) seems to have fixed this. Same behavior for other devices: if trying to pair leaving "Permit Join (All)" enabled...

The error still present using 1.36.1 and latest Conbee 3 firmware 0x26510900 (15 April) with this error log: > 11:33:34: Device '0x0015bc001a02296f' joined 11:33:34: MQTT publish: topic 'zigbee2mqtt/bridge/event', payload '{"data":{"friendly_name":"0x0015bc001a02296f","ieee_address":"0x0015bc001a02296f"},"type":"device_joined"}'...

Pairing via a specific Router (and not use "Permit Join (All)" and neither via Coordinator) seems to have fixed the pairing procedure. However using Conbee and latest 1.34-dev version I'm...

Same "unable to write settings" in latest 1.35 version using Conbee 3....Neither do a "_re-configure_" do anything. Using Conbee2 works well. What can be the cause? Just to point me...

> deCONZ_ConBeeIII_0x264f0900.bin Did you tried even the newest firmware of January 2024?

131 and probably other Develco similar devices doesn't have a Version but only a Firmware Date.

I started saying "131 and MAYBE other...." 🤷‍♂️ 

It would not be an issue if there is an Option to enable/disable this reformatting.....but there isn't 😅🤦‍♂️