RTCGQ14LM issues on Conbee 3

[emandtf]

What happened?

I'm running latest Z2M DEV using Conbee 2 and all works fine. When I switch to Conbee 3 (latest firmware 0x264e0900 of 8 December) I'm unable to set any setting (occupancy_timeout, trigger_indicator, motion_sensitivity, etc...) and 99% of times I'm unable to pair new devices of same type. The red error toast message report that "no response" from the device.

If I switch to Conbee 3 but use "./data/database.db" of Conbee 2 (so without doing a re-pairing all devices) most of those sensors works well as paired with Conbee 2.

What did you expect to happen?

No response

How to reproduce it (minimal and precise)

No response

Zigbee2MQTT version

1.34-dev

Adapter firmware version

0x264e0900

Adapter

Conbee 3

Debug log

No response

[emandtf]

Pairing via a specific Router (and not use "Permit Join (All)" and neither via Coordinator) seems to have fixed the pairing procedure. However using Conbee and latest 1.34-dev version I'm unable to set any device settings as I mentioned above.

Switching to Conbee 2 fixes this issue.

[emandtf]

Same "unable to write settings" in latest 1.35 version using Conbee 3....Neither do a "re-configure" do anything. Using Conbee2 works well.

What can be the cause? Just to point me somewhere in the code.... (I'm a developer, I could check)

[joujou333]

Got the same issue, conbee 2 is working fine, with 3 i can not pair them. Using latest firmware: deCONZ_ConBeeIII_0x264f0900.bin Zigbee2mqtt version 1.35.1-1

[emandtf]

deCONZ_ConBeeIII_0x264f0900.bin

Did you tried even the newest firmware of January 2024?

[joujou333]

It is the latest: https://deconz.dresden-elektronik.de/deconz-firmware/?C=M;O=D Also tried it on my local machine with Deconz, pairing devices works fine on there.

[Koenkk]

Conbee 3 firmware does not support all Xiaomi devices fully yet (which Conbee 2 does). Dresden Elektronik is working to fix this (at least that's what I heard)

[github-actions[bot]]

This issue is stale because it has been open 180 days with no activity. Remove stale label or comment or this will be closed in 30 days