Joakim Plate

I've marked them as the correct state class. But i think one may need to set a device class too.

Why not just set those things using customize on the sensors?

Yes

Right. Those can't be handled that way.

For now as mentioned, you can set this the measurement attribute in a customize entry inside home assistant.

https://www.home-assistant.io/docs/configuration/customizing-devices/

I think you must select a correct device class too.

> > I did this, and I just want to make note that the compressor time factors does not make any sense as far as I can see. > >...

I think heat meter will only show up if you have a flow meter installed on your pump.

Well it's two things really. A flow meter measures the hot water flow rate out of the pump. It can then calculate the energy output. An energy meater can be...