elektrinis
elektrinis
> I'm running HA in supervised mode on latest Debian 11, to stay in a supported environment ! I'm on the same boat, just not as advanced as you. Would...
I have a weird issue. I have not set VAT when installing the plugin, and later on I have configured in the yaml with VAT. The end result it I...
+1 for accelerometer. Bit frustrating to find it cold each time. Also, is it possible to implement supply from USB C PD? There are several examples on github how to...
Arduino project: https://github.com/ReclaimerLabs/USB_PD Other: https://github.com/ReclaimerLabs/USB-PD-Breakout I also saw one for STM, can't find it quickly.
I have also noticed that heater is being switched very slowly. You should PWM it at 16kHz, like most power electronics.
Thank you for explaining. Not criticizing, just want to understand the issue better. I have a fair amount of experience with BLDC/AC motor drives that usually run at 16kHz PWM...
> > set the location where the recordings should be saved > > introduce a setting record -> location (with option to record to other local drive at least) >...
Have you resolved this? I have a similar issue, with z2m as well: * All trigger IDs have been cleared. * All device/entity IDs have been cleared. I have tried...
The result in graphs below. Works well when integration is reloaded, for that moment. I'm so tired of maintaining my HA due to many issues like this. What would be...