el-quique
el-quique
[ankonaskiff17](https://github.com/ankonaskiff17) Hello. Try uninstalling moonraker (previously backup config) and then reinstall
Hello. Are you using raspiOS or mainsaillOS. Thx
Hi change pins assignament on pins_RUMBA_common.h for a delta: // // Limit Switches // //#define X_MIN_PIN PB12 //#define X_MAX_PIN PB13 //#define Y_MIN_PIN PB15 //#define Y_MAX_PIN PD8 //#define Z_MIN_PIN PD9 //#define...
Hi. Controlled pin BLTouch not used UART pin or DIAG pin.
> @chrissbarr do you have any ideas? Hi use: in Configuration.h //#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_PIN PB8 in Configuration_adv.h #if ENABLED(BLTOUCH) #define BLTOUCH_DELAY 500 //change 500 value for clon or original...
The same in linux mint debian edition
Idem in LinuxMint 22. Ryzen 5 5600x Nvidia 3060 Ti
Problem HOST Conection From what I'm seeing, the problem comes from the Linuxmint side. When I go to the connection settings and then click on browse, it doesn't find any...
@broncosis . Hello. You are using LM Debian Edition? or LM Cinnamon
  @broncosis @darco415 **Half solution on LinuxMint 22 updated to today.** In the host for the printer connection use:...