John Davis comments

Repositories
Issues
Comments

Results 4 comments of


                                            John Davis

Print not centered if using G29 to auto-level

For me it seems to be related to an error with G28. It zeroes X, then zeroes Y, then zeroes Z to Y10 and calculates everything else from there. If...

Print not centered if using G29 to auto-level

No. M212 X0 Y0 Z0.6.

Print not centered if using G29 to auto-level

Using non-zero values for X and Y probe offset is hacky IF you're using a probe. I'm using the nozzle to probe the bed so M212 X0 Y0 is correct...

Print not centered if using G29 to auto-level

The probe offset is "needed" for the Printrbot Simple with the standard inductive probe. Having the correct offset will keep the bot from attempting to home in the Z direction...