NodeRed_Heishamon_control
NodeRed_Heishamon_control copied to clipboard
edterbak
a Node Red flow to interact with Heishamon (a panasonic heatpump through an ESP board)
 Just a little suggestion for improvement: I used this for some weeks and it seems to work: Its an adaption of your code for the energy-Tab...
Good afternoon, I have an Aquarea kit-ADC-16HE5C-CL Generation H with a 100l inertia tank. The issue I'm facing is that the heat pump is too large for my home, resulting...
Today I closed issue #150. That solved a problem with values of Power. But there is still something else.. When I compare the values of my Panasonic K-series to the...
As switching on night-reduction with offset -3 I got a 5 min compressor shutdown... To avoid this I put a 10 min smoothing function into your flow... Maybe you have...
The electric measurement of the Jeisha is not very accurate: it is better to use an external counter, which can be attached to the Heishamon. I prefer this way and...
For some weird reason the defrost state (0/1) is not shown in the graph on Energy tab > Efficiency chart
After an update or fresh install, the sent setpoint is not shown the first couple of times. Only after toggling the setpoint x number of times, the logic starts working....
I would like a better COP calculation while the built in one is way to optimistic. I have one kWh device that measures all consumed power from Heatpump. This one:...
Hello, the integrated heat meter of the Heisha/Jeisha is bad - it is always rounded down to a whole 200 watts ... not everyone wants to install an external counter....
