edsub

I am working on a solution with the same purpose. I chose a solution the other way around: Based on the logging of an EVENT, the Domoticz webservice is triggered...

> Try filling in the right SSID and key for your WIFI network and modify the wpa_supplicant.conf accordingly. In the description of goke_p2pcam_param I read you can supply ANY value...

Well I managed to get a bit further: 1. The R/W hack works although I have a fairly recent version: 3.2.8.0121 2. Using Linux scripting I am almost there to...

Cool, will try that. Some progress from my side: network available detection is now much more reliable (used to be just a sleep in which it work in most cases....

OK, so here is the the first release of my fork of this project: https://goo.gl/pYPF4r (and in https://github.com/edsub/Goke_GK7102 ) Changes / Improvements: 1. Startup made more robust (especialy waiting for...

You do not need a telnet session via the uart (which indeed is the 3 pinholes). Just use the sd to hack and start a telnet session to the ip...

If the camera keeps connecting to the cloud, then the hack was not applied. You can verify that by (eg. via telnet) compare files in the home folder with files...

"but be careful, some might not like being changed!" Defo.... Mine rebooted at some point while executing the loop. And seems to be stuck. The error it keeps giving (after...

Solved, after a lot of resetting and trying with the app finally got the camera back to factory. Hack re-applied... All ok

The 4G modem/router the camera will be linked to, does not support forcing a fixed ip based om mac. Hence my question.....