edbye

Yes, this would be a fantastic addition.

This seems very similar, as you note, to the issue I raise ( https://github.com/microsoft/pxt-microbit/issues/5710 foundation ticket https://support.microbit.org/helpdesk/tickets/77229) If you observe carefully, you will find that the V1 items make a...

My test code was to implement a sequential counter, starting from 1 and incrementing/displaying every loop iteration. When issue arises, then counter should be large; I found it was close...

I tried the https://github.com/microbit-carlos test code under Win11 running MS Edge. all other details same. The V2.21 crashed within the hour = LED matrix goes blank.

There appears to be two issues here: 1. In some computers/operating systems, webusb sends an illegal command to attached Microbit. 2. The attached Microbit responds inappropriately to illegal commands.

Hi [@microbit-carlos](https://github.com/microbit-carlos), My original report was of a very similar, at least in part, to the issue being considered here, see [micro:bit V2 may hang when WebUSB connected to MakeCode...

A while back, I experimented in monitoring the USB interface, file attached [DMS USB monitor program output.docx](https://github.com/user-attachments/files/16697856/DMS.USB.monitor.program.output.docx) I didn't know really what to do or make or the information I...

Hi, I tested Beta version as requested, here is what I did and results: Using MS Edge, launched https://makecode.microbit.org/beta in new tab (current release of Makecode remained loaded in another...