ec-blaster
ec-blaster
On a previous version of Google Home app, I was able to assign the device to a room. Then the app updated and that functionality disappeared... I'm using the library
I have a similar problem with BL0937. The driver's default GPIO's interfere with one of my device's LED. It would be ideal if we could **configure the custom GPIO's of...
I was able to compile it with my changes. I opened a new issue here with the results: #92
I must say that I've been reading this issue and I was to say that mine was stable (equivalent configuration, T34 and BL0937). But finally, after a window between 24h...
Yes it does
I'll test it too. My results with v1.4.16: 23 hours alive and then again hanged. I'm going to disable the power meter and test again with the same version, let's...
> Then it's most likely the hardware issue. Maybe bad capacitor? > > I recently wrote a guide about that, but English translation is not done yet. Use google translate:...
> I am getting N chip BL0937 socket and will check this ou tas well. > > @ec-blaster you also have N version? I have a T34, a superset of...
I'm still testing stability... ![imagen](https://user-images.githubusercontent.com/8253942/174603863-fe795ff6-7e19-4a0e-a489-5aecee050b44.png) ... and v1.4.27 seems to perform pretty well.
I'm also interested in this integration. As a matter of fact, this is the only device I'm missing to get to ZHA from Zigbee2Mqtt. I can contribute if you guide...