eatoff8

I'm experiencing the same as everyone else here it seems. I upgraded to a NVIDIA shield tv pro box and the screen capture now works fine. Would have been nice...

> @PsychoRS thanks for the comments. I will see what I can find out, or if there is a way to actually adjust the fan speeds. OK, I only just...

@frankcrawford Thanks for all the help with the driver package! Bizarre that it works the first time, and then never again until after a reboot. Is there any kind of...

> As you can see, the fan slow downs a bit (from 1400RPM to around 800RPM) when /sys/class/hwmon5/pwm1_enable is set to 1 (manual) by pwmconfig, but pwm control is non-existent....

> Yes, the fan never stops in my case. It just moves between 1200-750 rpm in a very narrow pwm_input range. And its an Arctic P12 PWM with a range...

> The main idea is to disable the motherboard's control of HDD fans. The method I tried was to enable the fan at the full speed setting. you are saying...

> > The method I tried was to enable the fan at the full speed setting. you are saying to disable the fan completely? have it switched off? > >...

would be amazing to get the X10 working in Home Assistant EDIT: So it seems this may no longer be being maintaned - https://github.com/bmccluskey/robovac/issues/38

A small section of the debu log when turning it on and adjusting the brightness if that is of any use (its the Light - Ensuite): `info 2024-09-19 18:31:13z2m: Successfully...

> Looks like I just missed the window on this one but for what it’s worth i’m experiencing exactly the same behavior described. Everything was working fine, and now suddenly...