E3D-Online Ltd

Please disable.

Disable cooling by default.

Presently disabled in the slicer. pelase enable and set to 0.5mm by default.

Currently the slicer settings for top layers defaults to 3, as we can a top layer off that leaves the model with just 2. Can it be increased to 4...

The default track width is 0.4mm, for a 0.4mm nozzle this is bad. Please set to 0.5.

The travel speeds after picking up the ASMBL tool are very slow. It can be set to 100mm/s-200mm/s. This includes immediately after the tool has been picked off the dock,...