Daniel Melendrez

Maximum allowed label length?

2

Dear @gregdavill First of all, thank you for this amazing tool. I am working on a PCB project that requires some long labels for some custom terminals. Something like this:...

Labels not changing on project ported from K8.08 to K9.00

6

Dear @gregdavill Thank you for the f**ing fantastic job you have done with KiBuzzard Unfortunately, it seems like porting a project originally started on KiCAD 8.0x broke KiBuzzard. If I...

Add support for the WeAct Studio STM32G474 Core Board [Update]

1

The closest board available is the [nucleo_g474re](https://github.com/platformio/platform-ststm32/blob/master/boards/nucleo_g474re.json), however, I am not fully familiar with these boards and I may need some help defining the right parameters for the WeAct board....

Issues persist

6

I tried to open issue #2, however, GH did not allow me. "It's-a-me" again. I had to reopen this because I am facing a similar issue right now: Why, no...

ESP32-S2 fails on I2C at 400 kHz. Extension of issue #12045

2

### Board ESP32-S2 ### Device Description Custom ESP32-S2 based on the Lolin S2 Mini Wemos ### Hardware Configuration GPIO35 and GPIO35 are connected to SDA and SCL, respectively. My test...

Where is the KiCAD Project file? No library cache

1

The pcb folder does not contain a KiCAD project file. Moreover, there is no library cache file: and thus, all symbols are corrupted: I wonder what is the reasoning behind...