dxmen7
dxmen7
Hello,Thanks for your reply. Yes I will give you my motherboard model number this weekend, I have to partially dismount my stove. I checked the adapter several times with a...
Sorry,Forgot the second part. Cabled it by RJ11 cable and modified as you described in your repo with crossing the lines.This cable goes to adapter, adapter is on top of...
Hello from Germany, I was not able to open side panel for direct access to motherboard. I only have model type, vendor serial number under device model of UI panel...
Hello, Yes, LED on stove side is blinking and confirmed with bus analyzer, that Tx and Rx are transmitted and received frames. D1 mini powered also. NO error on stove...
It’s Model PF733 from Jotul. Yes they offer a WiFi connection box with mobile app for one 200€, that was my trigger to try it by myself with your repo....
Yes, D3 LED is blinking shortly after powering up. Web Page looks like this:  Uptime currently less than 1 min. But also after 5 mins same behavior. > Am...
 I am using firmware 2.1.5/3.1.2
Yes I have compiled it with Arduino IDE, but don't get any useful output. tried different Baudrates for serial monitor
load 0x3fff20b8, len 40, room 8 tail 0 chksum 0x2b csum 0x2b v000471b0 ~ld rf cal sector: 1020 freq trace enable 0 rf[112] : 0� With Baudrate 74880. Output form...
this with Baudrate 38400: b q!!i% H N%/�ayFC�g!n5)%oX %1-�,:!9Bg!yk)1%oC!1)B :1)J� )J){ B �)s '9 H:�=H +?))�