Declan Valters

Feedback and general suggestions from learners

1

Hello. I'd just thought I'd share a couple of comments/feedback from students after delivering this lesson while it is still fresh in my mind. ## General feedback The lesson was...

# Groundwater Input and Output Need to figure out if any are not needed for GW simple vs SLiM options ## Input | FILE | Format | GW | SLiM...

Large memory runs - segfault?

1

Enquiry via email: > I’m setting up a HC model (Karnali River / Nepal) and have two issues: > > Segmentation fault: I can run the model up to a...

Several new components have been added to the CAESAR-Lisflood code upstream (the Windows version). AB has added these componets to the CAESAR_GW batch of code. The main additions are the...

Currently a maximum of three input points are supported (see figure), but for our use we have interpolated level data/gauge data resulting in multiple input points.

## Updated 25/02/22 **This issue has been picked up again as it would also be good to support lat/lon and/or BNG specifically for the x/y positions for reach inputs.** At...

Currently hard coded at: https://github.com/dvalters/HAIL-CAESAR/blob/d856fa9de33659008345dcaf83cc3650b76defb9/include/catchmentmodel/LSDCatchmentModel.hpp#L544

# Summary For the Hull work, HC will need the tidal/stage modes implemented. (TBC)

## Summary We need some documentation for reach mode. The inputs are the same as the CAESAR-Lisflood so should be fairly similar, the main difference is specifying the input files...

Update - in fact this is already implemented in Tom's branch of Caesar Lisflood, so we could take his implementation and put it into HC