dsovsyannikov

Results 7 comments of dsovsyannikov

fix print in the air

![изображение](https://user-images.githubusercontent.com/91129436/216014060-e14a4204-7f58-415c-bea7-c75ab5a0a055.png)

fix print in the air

![изображение](https://user-images.githubusercontent.com/91129436/216014633-73939a23-0e3e-4167-a019-a1790f94da64.png)

fix print in the air

[disk.zip](https://github.com/prusa3d/PrusaSlicer/files/10555862/disk.zip)

fix print in the air

the conditions I wrote will greatly improve the printing of overhangs and bridges I hope the developers will accept this.

fix print in the air

![изображение](https://user-images.githubusercontent.com/91129436/224131220-ffadee1a-bdc3-4770-8d80-01a48a6d82c0.png)

fix print in the air

[kp5l v1.zip](https://github.com/prusa3d/PrusaSlicer/files/10935222/kp5l.v1.zip)

fix print in the air

First of all, print something that has 100% contact with what has already been printed. then in descending order of percentages of contact with what has already been printed. overhanging...