Philip Mally

I'll do you one even better. This allows you to set Pressure Advance and Smooth Time (default is 0.06) M900 K0 S0.6 [gcode_macro M900] description: Set Pressure Advance and Smooth...

> There are 3 fan headers on the SKR 1.4 -- but only one is PWM? (i.e. the CNC fan header?). > > I'm not using a part cooling fan,...

yes, that's already enabled. The SKR pro is a totally different board. The problem is the pins are connected directly to power and GND. just like the schematic shows. What...

exactly, pisses me off. I can tell by looking at the schematics the way they designed it would require adding another buffer just to control the fan mosfets so they...

sure, but that defeats having dual extrusion which I do

I don't have the metal plus dual extruder firmware on here yet, I can work on that for you in the coming weeks.

printrboard g2 would work

having the same issue

I've been pulling my hair out trying to figure out what the hell is wrong. The Z does not move up until the layer height value is greater than the...

Incase anyone has interest in this I have been working on porting marlin and klipper to the g2, we are pretty far along. https://github.com/Printrbot/printrboardmodernmarlin/wiki/Printrboard-G2-164v3c-Marlin-&-Klipper-Support