drmulligan

According to [ The Greatest Arduino UNO in the World ](https://www.instructables.com/The-Greatest-Arduino-UNO-in-the-World/) this board appears to be the same as board ID esp32doit-espduino.

I too am encountering this. Scanning for my RD200 returns name: 'FR:RU22201030471' Once my esp32 connects I see logs exactly as in the comment by @realumhelp, then every few minutes...

@arpia49 I have tried exactly the same change you proposed before but it did not work. How did you determine the the correct GATT for your firmware version? It seems...

I will have to learn bluetoothctl and put a Pi near my RD200 in order to be able to check this. Unfortunately I only have the Esp32 with EspHome near...

#1707 is also related.

#1406 and #1563 are related. Variants of this device is not properly supported yet with missing or sensors mixed up. In my case my zigbee signature is identical to the...

No CPU Temperature for Intel NUC DC3217IYE with Intel Core i3-3217U. * is only 0 ➜ ~ cat /sys/class/hwmon/hwmon*/name acpitz Where * is 0, 1 or 2. ➜ ~ cat...

I can confirm that this is still an issue for _TZE200_dwcarsat.

Yes it is not hard. It's just no different from the RAMPS 1.6 board though. You can't use the advanced features of the RAMPS 1.6 plus board. Check out Alex...

@EsserPrototyping I assume this means you do not have a RRD LCD display then. There are two problems with RE-ARM and this board, one you've addressed with missing lines used...