drich

Hello, the second radio module is not mandatory and is only used for diversity : it decreases the risk of missing transmitted packets to the drone. If you are about...

I just wrote the beginning of the first draft : https://github.com/dridri/bcflight/wiki/Building I hope it will help and will continue it as soon as possible. Tell me if you have any...

It has indeed a resolution of 125. But there is currently a problem caused by the raspberry pi itself (and I'm afraid that it cannot be solved) that only one...

I already though about that, and the only solution I found is to use fast-switching transistors to alternatively send signals to motors. I will take a try on it on...

hmm actually using something like this http://www.ti.com/lit/ds/symlink/cd4066b-q1.pdf would be much easier. All the IN pins would be connected to Raspberry Pi's PWM output, CONTROL pins connected to 4 different GPIOs...

hehe, looks like I'll have to finish the buildroot config and make a documentation

On the electronic part there is only some soldering, nothing more

I'm also planning to produce Raspberry Pi shields containing all the electronics at low scale

I did not finish it yet, but you could take a look at the [Configuration](https://github.com/dridri/bcflight/wiki/Configuration) wiki. This is more than just a configuration file, the LUA engine actually spawn class...

Same issue with our app, deployment is reported as failed but actually works : ``` 2023-12-05T11:23:12 [INFO]: Beginning deployment for application xxxxxxxxxxxxx, branch:dev, buildId 0000000000 2023-12-05T11:23:12 [INFO]: Got archive: 9164468...